DS1013M-60 Overview
In order to ensure cost-effectiveness, it is packaged using Tube. With the 8-DIP (0.300, 7.62mm) package, additional insulation hardware is no longer required. A reliable performance can be achieved with the supply voltage of 4.75V~5.25V. As a mounting technique, Through Hole has been used. This device has an operating temperature of 0°C~70°C. 1 taps/steps are configured. The device is placed at the location of the terminals at DUAL. Several terminations are provided for unique configurations, including a 8 termination. An operating voltage of 5V is applied to the device when it is in operation. It uses SILICON DELAY LINE as a logic type. A supply voltage of 4.75V is sufficient for it to operate. It is acceptable to run it at the maximum voltage of 5.25V. As part of the CMOS family, there are several active components. As a result of its large BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT and other specific characteristics, it is well suited for use in a variety of applications.
DS1013M-60 Features
Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
stay resistance at CMOS

DS1013M-60 Applications
There are a lot of Rochester Electronics, LLC
DS1013M-60 Delay Lines Timing ICs applications.

Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation
LCD Televisions
Telecommunications
Digital Test Equipment
Digital Video Projection
Signal Generators and Analyzers
Clock De-Skewing

Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
Terminal Finish	TIN LEAD
Additional Feature	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
JESD-30 Code	R-PDIP-T8
Function	Multiple, NonProgrammable
Qualification Status	COMMERCIAL
Supply Voltage-Max (Vsup)	5.25V
Supply Voltage-Min (Vsup)	4.75V
Family	CMOS
Output Polarity	TRUE
Logic IC Type	SILICON DELAY LINE
Number of Taps/Steps	1
Number of Independent Delays	3
Delay to 1st Tap	60ns
Programmable Delay Line	NO
Total Delay-Nom (td)	60 ns
Height Seated (Max)	4.572mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant
Mount	Through Hole
Published	1999
JESD-609 Code	e3
Moisture Sensitivity Level (MSL)	1 (Unlimited)
ECCN Code	EAR99
Terminal Finish	MATTE TIN
Peak Reflow Temperature (Cel)	260
Base Part Number	DS1013
Qualification Status	Not Qualified
Lead Free	Contains Lead