DS1013M-80+ Overview
As a cost-effective packaging method, Tube is used. Using the 8-DIP (0.300, 7.62mm) package eliminates the need for additional insulating hardware in applications. It is possible to achieve reliable performance with 4.75V~5.25V due to the supply voltage. As its mounting type, Through Hole is used. It operates at a temperature of 0°C~70°C. The device has been configured with 1 taps and steps. For a variety of applications, it is universally preferred to use parts with the same base part number DS1013. At DUAL are the terminals. A unique configuration is possible with the 8 terminations. During operation, 5V is supplied with a voltage. A logic type of SILICON DELAY LINE is used. It can operate with a minimum supply voltage of 4.75V. If the maximum supply voltage is 5.25V, it is acceptable for it to operate. There are a number of active components within the CMOS family. Its BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT coupled with other specific characteristics make it suitable for a variety of applications.
DS1013M-80+ Features
Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
stay resistance at CMOS

DS1013M-80+ Applications
There are a lot of Maxim Integrated
DS1013M-80+ Delay Lines Timing ICs applications.

High Vibration, High Acceleration Environments
Portable and Battery-Powered Equipment
Clock Synchronization
Digital Systems
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation

Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	0°C~70°C
Packaging	Tube
Published	1999
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	MATTE TIN
Additional Feature	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DS1013
JESD-30 Code	R-PDIP-T8
Function	Multiple, NonProgrammable
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.25V
Supply Voltage-Min (Vsup)	4.75V
Family	CMOS
Output Polarity	TRUE
Logic IC Type	SILICON DELAY LINE
Number of Taps/Steps	1
Number of Independent Delays	3
Delay to 1st Tap	80ns
Programmable Delay Line	NO
Total Delay-Nom (td)	80 ns
Height Seated (Max)	4.572mm
Width	7.62mm
RoHS Status	ROHS3 Compliant