DS1040Z-B40 OverviewThe product is packaged using Tube in order to maximize its cost-effectiveness. In applications requiring additional insulation, the 8-SOIC (0.154, 3.90mm Width) package can be used instead. As a result of the supply voltage of 4.75V~5.25V, reliable performance is possible. This type of mounting is based on the Surface Mount technique. A temperature range of 0°C~70°C is available. A 5 tap/step configuration is provided. Many related parts with the same base part number DS1040 are universally preferred. A terminal is located at DUAL. In order to provide unique configurations, it is equipped with 8 terminations. When the device is operating, the supply voltage of 5V is provided. As its logic type, PULSE GENERATOR DELAY LINE is used. In Surface Mount, it is mounted. A flexible power supply is provided for the operation of 5V. This is one of the key active components of the CMOS/TTL family of compounds.
DS1040Z-B40 FeaturesSupply voltage at Tube volts
operate supply current at 5V
with PULSE GENERATOR DELAY LINE bits
supply type: 5V
stay resistance at CMOS/TTL
DS1040Z-B40 ApplicationsThere are a lot of Maxim Integrated
DS1040Z-B40 Delay Lines Timing ICs applications.
Portable and Battery-Powered Equipment
Clock Synchronization
Digital Systems
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation
LCD Televisions
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1040 |
| JESD-30 Code | R-PDSO-G8 |
| Function | 1-Shot, Programmable |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Family | CMOS/TTL |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PULSE GENERATOR DELAY LINE |
| Number of Taps/Steps | 5 |
| Number of Independent Delays | 1 |
| Delay to 1st Tap | 20ns |
| Programmable Delay Line | YES |
| Available Total Delays | 40ns |
| Tap Increment | 5ns |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1040Z-B40 Datasheet
+8613715157867