DS1100M-500 Overview
In applications requiring additional insulation, the 8-DIP (0.300, 7.62mm) package can be used instead. As a result of the supply voltage of 4.75V ~ 5.25V, reliable performance is possible. This type of mounting is based on the Through Hole technique. A temperature range of -40°C ~ 85°C is available. A 5 tap/step configuration is provided. In Through Hole, it is mounted. There is a supplier device package 8-PDIP associated with it. Maintaining a maximum operating temperature of 85 °C will ensure that the system runs optimally. Ideally, the minimum operating temperature should be maintained at -40 °C. There are many electronic devices in the - series, which are considered to be the most important. As far as the supply voltage is concerned, it supports a maximum of 5.25 V. There is a minimum supply voltage of 4.75 V supported by this device.
DS1100M-500 Features
Mounting Type: -
Clock Frequency: 4.75 V

DS1100M-500 Applications
There are a lot of Analog Devices
DS1100M-500 Delay Lines Timing ICs applications.

Portable and Battery-Powered Equipment
Clock Synchronization
Digital Systems
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation
LCD Televisions

Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Supplier Device Package	8-PDIP
RoHS	Compliant
Package	Tube
Base Product Number	DS1100
Mfr	Analog Devices Inc./Maxim Integrated
Product Status	Obsolete
Operating Temperature	-40°C ~ 85°C
Series	-
Max Operating Temperature	85 °C
Min Operating Temperature	-40 °C
Voltage - Supply	4.75V ~ 5.25V
Function	Nonprogrammable
Max Supply Voltage	5.25 V
Min Supply Voltage	4.75 V
Number of Taps/Steps	5
Number of Independent Delays	1
Delay to 1st Tap	100ns
Available Total Delays	500ns
Tap Increment	100 ns
Lead Free	Lead Free