DS1110E-125+ OverviewFor cost-effective packaging, Tube is used. By using the 14-TSSOP (0.173, 4.40mm Width) package, applications are no longer required to use additional insulating hardware. In order to ensure reliable performance, 4.75V~5.25V is supplied with a voltage. As its mounting method, Surface Mount is used. The operating temperature is -40°C~85°C. Taps and steps are configured with 10. The use of related parts with the same base part number DS1110 is universally preferred for a wide range of applications. At DUAL, the terminals are located. For a unique configuration, it is equipped with 14 terminations. When operating, 5V receives a supply voltage. It uses the logic type SILICON DELAY LINE. A minimum supply voltage of 4.75V is acceptable for its operation. Providing a maximum supply voltage of 5.25V is acceptable.
DS1110E-125+ FeaturesSupply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
DS1110E-125+ ApplicationsThere are a lot of Maxim Integrated
DS1110E-125+ Delay Lines Timing ICs applications.
Switch Debouncing
High Vibration, High Acceleration Environments
Portable and Battery-Powered Equipment
Clock Synchronization
Digital Systems
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | MATTE TIN |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1110 |
| Function | Nonprogrammable |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Output Polarity | TRUE |
| Logic IC Type | SILICON DELAY LINE |
| Number of Taps/Steps | 10 |
| Number of Independent Delays | 1 |
| Delay to 1st Tap | 12.5ns |
| Programmable Delay Line | NO |
| Available Total Delays | 125ns |
| Total Delay-Nom (td) | 125 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
DS1110E-125+ Datasheet
+8613715157867