DS1110E-500+ OverviewIn order to ensure cost-effectiveness, it is packaged using Tube. With the 14-TSSOP (0.173, 4.40mm Width) package, additional insulation hardware is no longer required. A reliable performance can be achieved with the supply voltage of 4.75V~5.25V. As a mounting technique, Surface Mount has been used. This device has an operating temperature of -40°C~85°C. 10 taps/steps are configured. Several parts with the same base part number DS1110 are universally preferred for a variety of applications. The device is placed at the location of the terminals at DUAL. Several terminations are provided for unique configurations, including a 14 termination. An operating voltage of 5V is applied to the device when it is in operation. It uses SILICON DELAY LINE as a logic type. A supply voltage of 4.75V is sufficient for it to operate. It is acceptable to run it at the maximum voltage of 5.25V.
DS1110E-500+ FeaturesSupply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
DS1110E-500+ ApplicationsThere are a lot of Maxim Integrated
DS1110E-500+ Delay Lines Timing ICs applications.
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation
LCD Televisions
Telecommunications
Digital Test Equipment
Digital Video Projection
Signal Generators and Analyzers
Clock De-Skewing
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1110 |
| Function | Nonprogrammable |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Output Polarity | TRUE |
| Logic IC Type | SILICON DELAY LINE |
| Number of Taps/Steps | 10 |
| Number of Independent Delays | 1 |
| Delay to 1st Tap | 50ns |
| Programmable Delay Line | NO |
| Available Total Delays | 500ns |
| Total Delay-Nom (td) | 500 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
DS1110E-500+ Datasheet
+8613715157867