DS15BR401TSQ OverviewTransport is made easy with power buffer packaging in 32-WFQFN Exposed Pad.In a package of Tape & Reel (TR) it is ready for power buffer.An easy-to-adjust universal mout.Typical Buffer, ReDriver type.The op amp buffer uses 3V~3.6V voltage to operate.There is CML, LVDS, LVPECL input facilitation.A -40°C~85°C should be set as the operating temperature in order to avoid malfunctions.In addition to LVDS, this operational amplifier buffer targets other applications.You can get more pin-to-pin solutions for your specific needs by searching with "DS15BR401".32 terminals are located on the op amp buffer.The splitter is able to perform many demanding tasks when provided with 3.3V voltage.Pinouts start at 32 pins on the power buffer.There are 32 pins on the op amp buffers.A Surface Mount hole allows it to be mounted on a PCB or other board.215mA is the voltage at which this power buffer operates.In order to operate normally, you need a voltage of 3.3V.The repeater signal implements 4 receivers.
DS15BR401TSQ FeaturesMainly used in LVDS.
DS15BR401TSQ ApplicationsThere are a lot of Texas Instruments
DS15BR401TSQ Signal Buffers, Repeaters, Splitters applications.
Cellular Phone Base Stations
Add/Drop Muxes
Digital Crossconnects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 32-WFQFN Exposed Pad |
Number of Pins | 32 |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
Pbfree Code | no |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 32 |
ECCN Code | 5A991.B.1 |
Type | Buffer, ReDriver |
Applications | LVDS |
Voltage - Supply | 3V~3.6V |
Terminal Position | QUAD |
Number of Functions | 1 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Base Part Number | DS15BR401 |
Pin Count | 32 |
Operating Supply Voltage | 3.3V |
Operating Supply Current | 215mA |
Propagation Delay | 2 ns |
Turn On Delay Time | 2 ns |
Differential Output | YES |
Input | CML, LVDS, LVPECL |
Power Consumption | 575W |
Driver Number of Bits | 4 |
Interface Standard | GENERAL PURPOSE |
Data Rate (Max) | 2Gbps |
Number of Receivers | 4 |
Delay Time | 1.0ns |
Capacitance - Input | 3pF |
Signal Conditioning | Output Pre-Emphasis |
Length | 5mm |
Height Seated (Max) | 0.8mm |
Width | 5mm |
Radiation Hardening | No |
RoHS Status | Non-RoHS Compliant |