DS1669-100+ Overview
It is contained in 8-DIP (0.300, 7.62mm) pacakge.This pentometer begins to be stored by Non-Volatile.There are embedded 1 circuits in this digital potentiometer.It is accessible in the Tube package to secure the digital analogic.There are 64 taps to protect the overcurrent of this pentometer.Pentometer consists of 64 positions.It is designed 8 terminations.This programmable potentiometer includes 1 functions for your reference.The total resistance of the speed potentiometers will be 100000Ohm as shown.8 pins can be seen in The digi devices.It is recommended to mount in the way of Through Hole.The potentionmeter can supply ±4.5V~8V voltage.This digital potentiometers operate temperature at the range of -40°C~85°C.100kOhm can limit the flow.Please take note of the following additional features of this digital potentiometer: THE VOLTAGE APPLIED TO ANY TERMINAL MUST NOT EXCEED THE -V OR BY 0.5 VOLTS
DS1669-100+ Features
Available in 8-DIP (0.300, 7.62mm) package
1 Circuits
Mounting Type: Through Hole
Operate temperature at the range of -40°C~85°C

DS1669-100+ Applications
There are a lot of Rochester Electronics, LLC
DS1669-100+ Digital Potentiometers applications.

Testing equipment
PC
Cell phone
Household appliances
Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply

Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	Dallastat™
Tolerance	±20%
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
Temperature Coefficient	750 ppm/°C
Resistance	100kOhm
Number of Positions	64
Terminal Finish	MATTE TIN
Additional Feature	THE VOLTAGE APPLIED TO ANY TERMINAL MUST NOT EXCEED THE -V OR BY 0.5 VOLTS
Voltage - Supply	±4.5V~8V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Pin Count	8
JESD-30 Code	R-PDIP-T8
Qualification Status	COMMERCIAL
Configuration	Potentiometer
Interface	Up/Down (UP, DN)
Number of Circuits	1
Memory Type	Non-Volatile
Bandwidth	0.1 kHz
Taper	Linear
Number of Taps	64
Total Resistance	100000Ohm
Resistance - Wiper (Ω) (Typ)	400
Temperature Coefficient (Typ)	750ppm/°C
Length	9.375mm
Height Seated (Max)	4.572mm
Width	7.62mm
RoHS Status	ROHS3 Compliant