DS1844-050 OverviewThere are 20-DIP (0.300, 7.62mm) packages in this package.Volatile is the point at which this pentometer starts to be stored.This digital potentiometer has 4 embedded circuits.Tube package provides access to it.To protect this pentometer from overcurrent, there are 64 taps.Positions 64 make up this pentometer.Digital potentiometer is designed wdigital potentiometerh terminations of 20.Listed below are 4 functions included in this programmable potentiometer.Its total resistance will be 50000Ohm.The performance of 3V is provided by 3V.In the digi devices, 20 pins can be seen.The mounting direction should be Through Hole.It is possible for the potentionmeter to supply voltages of 2.7V~5.5V.In this digital potentiometer, the temperature range is -40°C~85°C.There is a possibility of limiting the flow by 50kOhm.When using this digital variable resistor, Selectable Address can be found.
DS1844-050 FeaturesAvailable in 20-DIP (0.300, 7.62mm) package
4 Circuits
Mounting Type: Through Hole
Operate temperature at the range of -40°C~85°C
DS1844-050 ApplicationsThere are a lot of Rochester Electronics, LLC
DS1844-050 Digital Potentiometers applications.
Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Tolerance | ±20% |
| JESD-609 Code | e0 |
| Feature | Selectable Address |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Temperature Coefficient | 750 ppm/°C |
| Resistance | 50kOhm |
| Number of Positions | 64 |
| Terminal Finish | TIN LEAD |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | COMMERCIAL |
| Configuration | Potentiometer |
| Interface | I2C, Serial |
| Number of Circuits | 4 |
| Memory Type | Volatile |
| Bandwidth | 0.2 kHz |
| Taper | Linear |
| Number of Taps | 64 |
| Total Resistance | 50000Ohm |
| Resistance - Wiper (Ω) (Typ) | 250 |
| Resistor Terminal Voltage-Max | 3.5V |
| Temperature Coefficient (Typ) | 750ppm/°C |
| Resistor Terminal Voltage-Min | -0.5V |
| Length | 26.16mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |