DS4M133D+33 Overview
Frequency 133.33MHz is set on the programmable timer.It is used to pack in Tube case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 74mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. The sum of the IC chip pins is 10 . The number of the chip's terminations sums up to 10. The minimum supply voltage of the chip must not be lower than 3.135V. The supply voltage of this chip should not exceed 3.465V.
DS4M133D+33 Features
Operate frequency at 133.33MHz
Package / Case: Tube
Max Operating temperature at -40°C

DS4M133D+33 Applications
There are a lot of Maxim Integrated
DS4M133D+33 Programmable Timers & Oscillators applications.

Consumer Electronics
Remote Sensors
White Goods
Electric Vehicles
Always On Systems
Clutch Actuator circuit
Car Door Handle circuit
Smart Key
Remote current sensor
Intruder Detection

Factory Lead Time	21 Weeks
Mount	Surface Mount
Number of Pins	10
Packaging	Tube
Published	2009
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Termination	SMD/SMT
ECCN Code	EAR99
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
HTS Code	8542.39.00.01
Terminal Position	QUAD
Supply Voltage	3.3V
Terminal Pitch	1mm
Frequency	133.33MHz
Frequency Stability	50 ppm
Pin Count	10
Operating Supply Voltage	3.3V
Temperature Grade	INDUSTRIAL
Max Supply Voltage	3.465V
Min Supply Voltage	3.135V
Operating Supply Current	74mA
uPs/uCs/Peripheral ICs Type	CLOCK GENERATOR, OTHER
Length	5mm
Height Seated (Max)	1.62mm
Width	3.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant