DS90LV001TLDX OverviewSeveral packaging options are available for convenient transportation, including 8-WFDFN Exposed Pad.Package number Tape & Reel (TR) is ready for power buffer.Adaptable universalism in a single mout.Here's a typical Buffer, ReDriver.The op amp buffer is powered by 3V~3.6V voltage.The system facilitates the input of CML, LVDS, LVPECL.To avoid malfunctions, you should set the operating temperature to -40°C~85°C.Among its applications are LVDS.Using "DS90LV001" will give you more solutions for your unique needs.It has 8 terminals.The peak reflow temperature of the material is 235.Due to the 3.3V voltage supply, this splitter can handle a multitude of demanding tasks.Power buffer pinout starts at 8 pins.It is equipped with 8 pins.For mounting on PCBs or other boards, there is a Surface Mount.70mA is the voltage that this power buffer operates on.The operating supply voltage of 3.3V is required for normal operation.The repeter uses a 1-Bit receiver.It dissipates 726mW of power at most.A nominal supply current of 70mA is required for normal use of the splitter.Within the video signal spliter are 1 drivers.
DS90LV001TLDX FeaturesMainly used in LVDS.
1-Bit receiver.
DS90LV001TLDX ApplicationsThere are a lot of Texas Instruments
DS90LV001TLDX Signal Buffers, Repeaters, Splitters applications.
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Industrial PCs
Test Equipment
Desktop Computers
Laptop Computers (for External Video Cards)
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | LVDS |
| Max Power Dissipation | 726mW |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS90LV001 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Power Dissipation | 726mW |
| Propagation Delay | 2 ns |
| Turn On Delay Time | 2 ns |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Power Consumption | 155W |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Number of Drivers | 1 |
| Data Rate (Max) | 800Mbps |
| Out Swing-Min | 0.25 V |
| Delay Time | 1.4ns |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
+8613715157867