There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).100-TQFPis the package in which it resides.There are 80 I/Os programmed in it.There is a 100terminations set on devices.This electrical component has a terminal position of 0.It is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.As a result, it is packaged as Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the MAX? 3000A series.This device can also display [0].The EPM3128shows its related parts.In digital circuits, there are 2500gates, which act as a basic building block.This logic element/block contains 8logic elements.It runs on a voltage of 2.5/3.33.3Vvolts.Initially, the maximum supply voltage (Vsup) is 3.6V.A supply voltage (Vsup) of greater than 3V should be used.Its clock frequency should not exceed 129.9MHz.

100-TQFP package
80 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies

There are a lot of Intel EPM3128ATC100-7N CPLDs applications.

• Digital systems

  
  

• Custom state machines

  
  

• Preset swapping

  
  

• Cross-Matrix Switch

  
  

• Handheld digital devices

  
  

• TIMERS/COUNTERS

  
  

• Bootloaders for FPGAs

  
  

• PLC analog input modules

  
  

• Portable digital devices

  
  

• DDC INTERFACE

  
  

  Mounting Type	Surface Mount
  Package / Case	100-TQFP
  Surface Mount	YES
  Operating Temperature	0°C~70°C TA
  Packaging	Tray
  Series	MAX® 3000A
  JESD-609 Code	e3
  Part Status	Obsolete
  Moisture Sensitivity Level (MSL)	3 (168 Hours)
  Number of Terminations	100
  ECCN Code	EAR99
  Terminal Finish	Matte Tin (Sn)
  Additional Feature	YES
  Terminal Position	QUAD
  Terminal Form	GULL WING
  Peak Reflow Temperature (Cel)	260
  Supply Voltage	3.3V
  Terminal Pitch	0.5mm
  Reach Compliance Code	compliant
  Time@Peak Reflow Temperature-Max (s)	40
  Base Part Number	EPM3128
  JESD-30 Code	S-PQFP-G100
  Qualification Status	Not Qualified
  Supply Voltage-Max (Vsup)	3.6V
  Power Supplies	2.5/3.33.3V
  Supply Voltage-Min (Vsup)	3V
  Programmable Type	In System Programmable
  Number of I/O	80
  Clock Frequency	129.9MHz
  Propagation Delay	7.5 ns
  Number of Gates	2500
  Output Function	MACROCELL
  Number of Macro Cells	128
  JTAG BST	YES
  Voltage Supply - Internal	3V~3.6V
  Delay Time tpd(1) Max	7.5ns
  Number of Logic Elements/Blocks	8
  Length	14mm
  Height Seated (Max)	1.27mm
  Width	14mm
  RoHS Status	RoHS Compliant