EPM7064BTI44-5 Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 44-TQFP package containing it.There are 36 I/Os on the board.Terminations of devices are set to 44.QUAD is the terminal position of this electrical part.A voltage of 2.5Vprovides power to the device.It is recommended that the chip be packaged by Tray.The device operates at a temperature of -40°C~85°C TA in order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The MAX® 7000B series FPGA is one of these types.If you use this device, you will also find YES.The EPM7064 can be used to identify its related parts.For digital circuits, there are 1250 gates. These devices serve as building blocks.In total, there are 4 logic elements/blocks.A power supply of 1.8/3.32.5V is required to operate it.In this case, the maximum supply voltage (Vsup) is 2.625V.Vsup (supply voltage) must be greater than 2.375V.Ideally, its clock frequency should not exceed 303MHz.
EPM7064BTI44-5 Features
44-TQFP package
36 I/Os
The operating temperature of -40°C~85°C TA
1.8/3.32.5V power supplies

EPM7064BTI44-5 Applications
There are a lot of Intel
EPM7064BTI44-5 CPLDs applications.

Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate

Mounting Type	Surface Mount
Package / Case	44-TQFP
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tray
Series	MAX® 7000B
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	44
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	YES
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Supply Voltage	2.5V
Terminal Pitch	0.8mm
Reach Compliance Code	compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	EPM7064
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	2.625V
Power Supplies	1.8/3.32.5V
Supply Voltage-Min (Vsup)	2.375V
Programmable Type	In System Programmable
Number of I/O	36
Clock Frequency	303MHz
Propagation Delay	3.5 ns
Number of Gates	1250
Output Function	MACROCELL
Number of Macro Cells	64
JTAG BST	YES
Voltage Supply - Internal	2.375V~2.625V
Delay Time tpd(1) Max	5ns
Number of Logic Elements/Blocks	4
Length	10mm
Height Seated (Max)	1.27mm
Width	10mm
RoHS Status	Non-RoHS Compliant