EPM7128SQC100-10N Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the 100-BQFP package, you will find it.In this case, there are 84 I/Os programmed.100 terminations are programmed into the device.This electrical component has a terminal position of QUAD.An electrical supply voltage of 5V is used to power it.Tray should be used to package the chip.Due to its reliability, it is operated at a temperature of 0°C~70°C TA.There should be a Surface Mount on the chip.The FPGA belongs to the MAX® 7000S series.This device also displays CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V.The EPM7128 shows its related parts.A digital circuit can be constructed using 2500 gates.8logic blocks/elements are present.This device runs on 3.3/55V volts of electricity.There is a maximum supply voltage (Vsup) of 5.25V.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.It is recommended that the clock frequency not exceed 125MHz.
EPM7128SQC100-10N Features
100-BQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies

EPM7128SQC100-10N Applications
There are a lot of Intel
EPM7128SQC100-10N CPLDs applications.

I/O expansion
Discrete logic functions
Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices

Mounting Type	Surface Mount
Package / Case	100-BQFP
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	MAX® 7000S
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Supply Voltage	5V
Terminal Pitch	0.65mm
Reach Compliance Code	compliant
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	EPM7128
JESD-30 Code	R-PQFP-G100
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.25V
Power Supplies	3.3/55V
Supply Voltage-Min (Vsup)	4.75V
Programmable Type	In System Programmable
Number of I/O	84
Clock Frequency	125MHz
Propagation Delay	10 ns
Number of Gates	2500
Output Function	MACROCELL
Number of Macro Cells	128
JTAG BST	YES
Voltage Supply - Internal	4.75V~5.25V
Delay Time tpd(1) Max	10ns
Number of Logic Elements/Blocks	8
Length	20mm
Height Seated (Max)	3.65mm
Width	14mm
RoHS Status	RoHS Compliant