EPM7128STC100-6 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a 100-TQFP package.It is equipped with 84 I/O ports.The termination of a device is set to 100.This electrical part has a terminal position of QUAD and is connected to the ground.The power source is powered by 5V volts.Ideally, the chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Surface Mount.In this case, it is a type of FPGA belonging to the MAX® 7000S series.It is also possible to find CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V when using this device.EPM7128 contains its related parts.In digital circuits, 2500 gates serve as building blocks.A logic element or block has 8 elements.Currently, it is powered by 3.3/55V sources.Supply voltage (Vsup) reaches a maximum of 5.25V.There should be a higher supply voltage (Vsup) than 4.75V.A frequency of 166.7MHz should not be exceeded by its clock.
EPM7128STC100-6 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies

EPM7128STC100-6 Applications
There are a lot of Intel
EPM7128STC100-6 CPLDs applications.

Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
D/T registers and latches

Mounting Type	Surface Mount
Package / Case	100-TQFP
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	MAX® 7000S
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	EPM7128
JESD-30 Code	S-PQFP-G100
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.25V
Power Supplies	3.3/55V
Supply Voltage-Min (Vsup)	4.75V
Programmable Type	In System Programmable
Number of I/O	84
Clock Frequency	166.7MHz
Propagation Delay	6 ns
Number of Gates	2500
Output Function	MACROCELL
Number of Macro Cells	128
JTAG BST	YES
Voltage Supply - Internal	4.75V~5.25V
Delay Time tpd(1) Max	6ns
Number of Logic Elements/Blocks	8
Length	14mm
Height Seated (Max)	1.27mm
Width	14mm
RoHS Status	Non-RoHS Compliant