EPM7128STC100-7 Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).100-TQFP is the package in which it resides.There are 84 I/Os programmed in it.The device is programmed with 100 terminations.As the terminal position of this electrical part is QUAD, it serves as an important access point for passengers and freight.Power is provided by a supply voltage of 5V volts.As a result, it is packaged as Tray.To ensure its reliability, the operating temperature is set to 0°C~70°C TA.The chip should be mounted by Surface Mount.It belongs to the MAX® 7000Sseries of FPGAs.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V can also be found.The EPM7128 indicates that its related parts can be found.2500 gates are devices that serve as building blocks for digital circuits.There are 8 logic elements/blocks.The system runs on a power supply of 3.3/55V watts.In this case, the maximum supply voltage (Vsup) reaches 5.25V.It is recommended that the supply voltage (Vsup) be greater than 4.75V.The clock frequency should not exceed 166.7MHz.
EPM7128STC100-7 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies

EPM7128STC100-7 Applications
There are a lot of Intel
EPM7128STC100-7 CPLDs applications.

Voltage level translation
Timing control
Interface bridging
I/O expansion
Discrete logic functions
Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices

Mounting Type	Surface Mount
Package / Case	100-TQFP
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	MAX® 7000S
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	EPM7128
JESD-30 Code	S-PQFP-G100
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.25V
Power Supplies	3.3/55V
Supply Voltage-Min (Vsup)	4.75V
Programmable Type	In System Programmable
Number of I/O	84
Clock Frequency	166.7MHz
Propagation Delay	7.5 ns
Number of Gates	2500
Output Function	MACROCELL
Number of Macro Cells	128
JTAG BST	YES
Voltage Supply - Internal	4.75V~5.25V
Delay Time tpd(1) Max	7.5ns
Number of Logic Elements/Blocks	8
Length	14mm
Height Seated (Max)	1.27mm
Width	14mm
RoHS Status	Non-RoHS Compliant