EPM7256AEFC100-7 Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 100-LBGA package containing it.There are 84 I/Os on the board.Terminations of devices are set to 100.BOTTOM is the terminal position of this electrical part.A voltage of 3.3Vprovides power to the device.It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TA in order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The MAX® 7000A series FPGA is one of these types.If you use this device, you will also find YES.The EPM7256 can be used to identify its related parts.For digital circuits, there are 5000 gates. These devices serve as building blocks.In total, there are 16 logic elements/blocks.A power supply of 2.5/3.33.3V is required to operate it.In this case, the maximum supply voltage (Vsup) is 3.6V.Vsup (supply voltage) must be greater than 3V.Ideally, its clock frequency should not exceed 126.6MHz.
EPM7256AEFC100-7 Features
100-LBGA package
84 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies

EPM7256AEFC100-7 Applications
There are a lot of Intel
EPM7256AEFC100-7 CPLDs applications.

Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate

Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	100-LBGA
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	MAX® 7000A
JESD-609 Code	e0
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
ECCN Code	3A991
Terminal Finish	TIN LEAD
Additional Feature	YES
HTS Code	8542.39.00.01
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	235
Supply Voltage	3.3V
Terminal Pitch	1mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	EPM7256
JESD-30 Code	S-PBGA-B100
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.33.3V
Supply Voltage-Min (Vsup)	3V
Programmable Type	In System Programmable
Number of I/O	84
Clock Frequency	126.6MHz
Propagation Delay	7.5 ns
Number of Gates	5000
Output Function	MACROCELL
Number of Macro Cells	256
JTAG BST	YES
Voltage Supply - Internal	3V~3.6V
Delay Time tpd(1) Max	7.5ns
Number of Logic Elements/Blocks	16
Length	11mm
Height Seated (Max)	1.7mm
Width	11mm
RoHS Status	RoHS Compliant