EPM7256AETC144-10N Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 144-LQFP package containing it.There are 120 I/Os on the board.Terminations of devices are set to 144.QUAD is the terminal position of this electrical part.A voltage of 3.3Vprovides power to the device.It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TA in order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The MAX® 7000A series FPGA is one of these types.If you use this device, you will also find YES.The EPM7256 can be used to identify its related parts.For digital circuits, there are 5000 gates. These devices serve as building blocks.In total, there are 16 logic elements/blocks.A power supply of 2.5/3.33.3V is required to operate it.In this case, the maximum supply voltage (Vsup) is 3.6V.Vsup (supply voltage) must be greater than 3V.Ideally, its clock frequency should not exceed 95.2MHz.
EPM7256AETC144-10N Features
144-LQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies

EPM7256AETC144-10N Applications
There are a lot of Intel
EPM7256AETC144-10N CPLDs applications.

Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate

Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	144-LQFP
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	MAX® 7000A
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	144
ECCN Code	3A991
Terminal Finish	Matte Tin (Sn) - annealed
Additional Feature	YES
HTS Code	8542.39.00.01
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	EPM7256
JESD-30 Code	S-PQFP-G144
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.33.3V
Supply Voltage-Min (Vsup)	3V
Programmable Type	In System Programmable
Number of I/O	120
Clock Frequency	95.2MHz
Propagation Delay	10 ns
Number of Gates	5000
Output Function	MACROCELL
Number of Macro Cells	256
JTAG BST	YES
Voltage Supply - Internal	3V~3.6V
Delay Time tpd(1) Max	10ns
Number of Logic Elements/Blocks	16
Length	20mm
Height Seated (Max)	1.6mm
Width	20mm
RoHS Status	RoHS Compliant