EPM7512AEFI256-10N Overview 512 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 256-BGA package.The device is programmed with 212 I/O ports.It is programmed to terminate devices at 256.There is a BOTTOM terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at -40°C~85°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the MAX® 7000A series contain this type of chip.When using this device, YES is also available.You can find its related parts in the EPM7512.10000 gates are used to construct digital circuits.32 logic elements/blocks exist.A power supply of 2.5/3.33.3V volts is required to operate this device.Initially, the maximum supply voltage (Vsup) is 3.6V.Voltage supply (Vsup) should be higher than 3V.The clock frequency of this device should not exceed 87MHz.
EPM7512AEFI256-10N Features256-BGA package
212 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
EPM7512AEFI256-10N ApplicationsThere are a lot of Intel
EPM7512AEFI256-10N CPLDs applications.
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
D/T registers and latches
Synchronous or asynchronous mode
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7512 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 212 |
| Clock Frequency | 87MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Length | 17mm |
| Height Seated (Max) | 2.1mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
EPM7512AEFI256-10N Datasheet
+8613715157867