EPM7512AETC144-12N Overview
The mobile phone network has 512 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the 144-LQFP package, you will find it.In this case, there are 120 I/Os programmed.144 terminations are programmed into the device.This electrical component has a terminal position of QUAD.An electrical supply voltage of 3.3V is used to power it.Tray should be used to package the chip.Due to its reliability, it is operated at a temperature of 0°C~70°C TA.There should be a Surface Mount on the chip.The FPGA belongs to the MAX® 7000A series.The EPM7512 shows its related parts.A digital circuit can be constructed using 10000 gates.32logic blocks/elements are present.This device runs on 2.5/3.33.3V volts of electricity.There is a maximum supply voltage (Vsup) of 3.6V.If the supply voltage (Vsup) is greater than 3V, then the device will work properly.It is recommended that the clock frequency not exceed 71.9MHz.
EPM7512AETC144-12N Features
144-LQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies

EPM7512AETC144-12N Applications
There are a lot of Intel
EPM7512AETC144-12N CPLDs applications.

I/O expansion
Discrete logic functions
Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices

Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	144-LQFP
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	MAX® 7000A
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	144
ECCN Code	3A991
Terminal Finish	Matte Tin (Sn)
HTS Code	8542.39.00.01
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	EPM7512
JESD-30 Code	S-PQFP-G144
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.33.3V
Supply Voltage-Min (Vsup)	3V
Programmable Type	In System Programmable
Number of I/O	120
Clock Frequency	71.9MHz
Propagation Delay	12 ns
Number of Gates	10000
Output Function	MACROCELL
Number of Macro Cells	512
JTAG BST	YES
Voltage Supply - Internal	3V~3.6V
Delay Time tpd(1) Max	12ns
Number of Logic Elements/Blocks	32
Length	20mm
Height Seated (Max)	1.6mm
Width	20mm
RoHS Status	RoHS Compliant