EPM7512BFC256-7N Overview
The mobile phone network has 512 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the 256-BGA package, you will find it.In this case, there are 212 I/Os programmed.256 terminations are programmed into the device.This electrical component has a terminal position of BOTTOM.An electrical supply voltage of 2.5V is used to power it.Tray should be used to package the chip.Due to its reliability, it is operated at a temperature of 0°C~70°C TA.There should be a Surface Mount on the chip.The FPGA belongs to the MAX® 7000B series.This device also displays YES.The EPM7512 shows its related parts.A digital circuit can be constructed using 10000 gates.32logic blocks/elements are present.This device runs on 1.8/3.32.5V volts of electricity.There is a maximum supply voltage (Vsup) of 2.625V.If the supply voltage (Vsup) is greater than 2.375V, then the device will work properly.It is recommended that the clock frequency not exceed 163.9MHz.
EPM7512BFC256-7N Features
256-BGA package
212 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies

EPM7512BFC256-7N Applications
There are a lot of Intel
EPM7512BFC256-7N CPLDs applications.

I/O expansion
Discrete logic functions
Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices

Mounting Type	Surface Mount
Package / Case	256-BGA
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	MAX® 7000B
JESD-609 Code	e1
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	256
ECCN Code	3A991
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Additional Feature	YES
HTS Code	8542.39.00.01
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Supply Voltage	2.5V
Terminal Pitch	1mm
Reach Compliance Code	compliant
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	EPM7512
JESD-30 Code	S-PBGA-B256
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	2.625V
Power Supplies	1.8/3.32.5V
Supply Voltage-Min (Vsup)	2.375V
Programmable Type	In System Programmable
Number of I/O	212
Clock Frequency	163.9MHz
Propagation Delay	5.5 ns
Number of Gates	10000
Output Function	MACROCELL
Number of Macro Cells	512
JTAG BST	YES
Voltage Supply - Internal	2.375V~2.625V
Delay Time tpd(1) Max	7.5ns
Number of Logic Elements/Blocks	32
Length	17mm
Height Seated (Max)	3.5mm
Width	17mm
RoHS Status	RoHS Compliant