GN1406-INTE3D Overview
The package Cut Tape (CT) contains it. In a 56-VFQFN Exposed Pad-shaped case, it comes. The recommended mounting type is Surface Mount. On the device, there are 1. Variations are made in the range of operating temperature -40°C~75°C. The component can supply a voltage of 1.2V 1.8V. The main purpose of the component is PCI Express (PCIe), InfiniBand. The output will be Clock. A total of 2002 parts have been published. Searching for information about GN1406 starts with the base part number. Ideally, it should be mounted with Surface Mount. Devices with 56 pins are designed. Temperatures below -40°C are not acceptable for this device. Temperatures below 75°C are recommended for operation. As a supplier device package, 56-QFN (8x8) is used by the company.
GN1406-INTE3D Features
Mounting Type: Surface Mount
Include 1 Circuits
run the output at th range of Clock
with 56 Pins

GN1406-INTE3D Applications
There are a lot of Semtech Corporation
GN1406-INTE3D application specific timer applications.

Wireless Access Point
Routers
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards

Factory Lead Time	16 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-VFQFN Exposed Pad
Number of Pins	56
Supplier Device Package	56-QFN (8x8)
Operating Temperature	-40°C~75°C
Packaging	Cut Tape (CT)
Published	2002
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Max Operating Temperature	75°C
Min Operating Temperature	-40°C
Voltage - Supply	1.2V 1.8V
Base Part Number	GN1406
Output	Clock
Number of Circuits	1
Input	Clock
Ratio - Input:Output	5:5
PLL	No
Differential - Input:Output	Yes/Yes
Main Purpose	PCI Express (PCIe), InfiniBand
RoHS Status	RoHS Compliant