INA118U/2K5 OverviewIn order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 125μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Maintain 80dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. As a whole, there are 3 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 36V. As a result of this, the buffer amplifier is packed in TR. There is an 350μA quiescent current in linear amplifier. It is important to keep the resistance within the 10GOhm range of the op amps.
INA118U/2K5 Features8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA118U/2K5 ApplicationsThere are a lot of Texas Instruments
INA118U/2K5 Instrumentational OP Amps applications.
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA118 |
| Pin Count | 8 |
| Operating Supply Voltage | 36V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Nominal Supply Current | 385μA |
| Quiescent Current | 350μA |
| Slew Rate | 0.9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Voltage - Input Offset | 25μV |
| Current - Output / Channel | 12mA |
| -3db Bandwidth | 0.8MHz |
| Dual Supply Voltage | 15V |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.02% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867