INA125UA OverviewPackaged in a 16-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Instrumentation type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 460μA, this op amp ic can operate. 80dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 5V. Currently, linear amplifier is operating with a quiescent current of 460μA. Instrumentation amplifier resistance should stay within the range of 100GOhm.
INA125UA Features16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA125UA ApplicationsThere are a lot of Texas Instruments
INA125UA Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA125 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 460μA |
| Nominal Supply Current | 325μA |
| Quiescent Current | 460μA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 150 kHz |
| Gain Bandwidth Product | 150 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Voltage - Input Offset | 50μV |
| Gain | 10000 dB |
| -3db Bandwidth | 0.15MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Voltage Gain-Nom | 10 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867