INA129U OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 50μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 700μA. Voltage gain should remain at 80dB. The op amp ic has 1 channels on it. This linear amplifier has a total of 3 elements. Buffer amplifier has a quiescent current of 700μA. Instrumentation amplifier resistance should remain within the range of 100GOhm.
INA129U Features8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA129U ApplicationsThere are a lot of Texas Instruments
INA129U Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA129 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Voltage - Input Offset | 10μV |
| Gain | 10000 dB |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.005μA |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867