INA210AIDCKT Overview
Packaged in a 6-TSSOP, SC-88, SOT-363 case, the buffer op amp is ready to use. An op amp ic of the Current Sense type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 6. The pins on this board total to 6 in total. A total of 6 pins are present on the instrumentation amplifier. There is an input offset voltage of 35μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 115μA, this op amp ic can operate. 46.02dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 24V.
INA210AIDCKT Features
6 Pins
46.02dB voltage gain

INA210AIDCKT Applications
There are a lot of Texas Instruments
INA210AIDCKT Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Weight	2.494758mg
Manufacturer Package Identifier	DCk(R-PDSO-G6)
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	6
Termination	SMD/SMT
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Base Part Number	INA210
Pin Count	6
Operating Supply Voltage	24V
Number of Channels	1
Operating Supply Current	115μA
Nominal Supply Current	65μA
Accuracy	1 %
Min Input Voltage	-300mV
Slew Rate	0.4V/μs
Amplifier Type	Current Sense
Common Mode Rejection Ratio	105 dB
Current - Input Bias	28μA
Max Input Voltage	26V
Voltage - Supply, Single/Dual (±)	2.7V~26V
Input Offset Voltage (Vos)	35μV
Bandwidth	14 kHz
Voltage Gain	46.02dB
Power Supply Rejection Ratio (PSRR)	140dB
Voltage - Input Offset	0.55μV
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free