INA331AIDGKR OverviewThere is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Instrumentation-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -55°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 415μA . 60dB should be the voltage gain. A linear amplifier like this has 1 circuits on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are 3 elements in total in this linear amplifier. For the packing of the instrumentation amplifier, TR is adopted. There is an 415μA quiescent current running through op amp ic. 10 TΩ is the range in which the op amp resistance should lie.
INA331AIDGKR Features8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA331AIDGKR ApplicationsThere are a lot of Texas Instruments
INA331AIDGKR Instrumentational OP Amps applications.
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 12 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA331 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 415μA |
| Nominal Supply Current | 490μA |
| Quiescent Current | 415μA |
| Slew Rate | 5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 2MHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 250μV |
| -3db Bandwidth | 2MHz |
| Voltage Gain-Nom | 25 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA331AIDGKR Datasheet
+8613715157867