IP82C52 Overview
In addition, it is available in the cost-effective package DIP.In order to transmit data, there are 1 channels available.Packaging is based on Bulk.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.Configured with 28 terminations.The device operates at 5V voltage.The status of this electronic part is currently Active.Data communication is handled by 1 serial I/Os.The mount can be accessed via the Through Hole method.This device operates with a supply voltage of 4.5 V ~ 5.5 V.UART is a type of 28-pin integrated circuUART.Ideally, the operating temperature should not exceed -40°C in order to ensure long-term performance.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.Initially, it will be configured with 28 pins.Using the Through Hole method, it is mounted.Keeping the supply voltage below 5.5V will ensure reliability.Supply voltages above 4.5V are known to ensure reliability.In the case of 5V power supplies, it is reliable and efficient to use by electronic designers.In order to achieve high efficiency, it is provided with the supply voltage of 5V.This part has a base part number of 82C52.In this case, 4mA represents the maximum supply current that can be used.Identified as a member of the -- series, this electronic component is intended for use in industrial applications.
IP82C52 Features
1 serial I/Os
Power supplies of 5V
Operating supply voltage of 5V

IP82C52 Applications
There are a lot of Intersil (Renesas Electronics America)
IP82C52 UARTs applications.

Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments

Factory Lead Time	7 Weeks
Mount	Through Hole
Package / Case	DIP
Mounting Type	Through Hole
Number of Pins	28
Supplier Device Package	28-PDIP
Packaging	Bulk
Published	1996
Series	--
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	--
Number of Terminations	28
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Voltage - Supply	4.5 V ~ 5.5 V
Terminal Position	DUAL
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	82C52
Pin Count	28
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	INDUSTRIAL
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Nominal Supply Current	4mA
Max Supply Current	4mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Data Rate	1 Mbps
Address Bus Width	2
Protocol	RS232
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	1Mbps
Number of Serial I/Os	1
Bus Compatibility	80C86; 80C88
Communication Protocol	ASYNC, BIT
With False Start Bit Detection	--
Features	--
With Modem Control	Yes
With Auto Flow Control	--
With IrDA Encoder/Decoder	--
Length	37.4mm
Height Seated (Max)	6.35mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead
Package / Case	28-DIP (0.600, 15.24mm)
Package	Bulk
Mfr	Harris Corporation
Product Status	Active
Series	-
Voltage - Supply	4.5V ~ 5.5V
Number of Channels	1, UART
Data Rate (Max)	1MBaud
With False Start Bit Detection	Yes
Features	-
With Auto Flow Control	No
With IrDA Encoder/Decoder	No
Surface Mount	NO
Packaging	Tube
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Terminal Finish	NOT SPECIFIED
Additional Feature	ICC_MAX AT FEXT = 2.4576MHZ
Voltage - Supply	4.5V~5.5V
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
JESD-30 Code	R-PDIP-T28
Qualification Status	COMMERCIAL
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Clock Frequency	16MHz
Data Transfer Rate-Max	0.125 MBps
Data Encoding/Decoding Method	NRZ
RoHS Status	Non-RoHS Compliant