ISL33003IRTZ-T Overview
A 8 terminal can be found on the op amp buffer.During reflow, NOT SPECIFIED is the peak temperature.It is capable of completing a wide range of tasks with the 2.7V voltage supplied.There are 8 pins on it.It is mounted on PCBs or other boards using a Surface Mount.The power buffer is powered by 4mA voltage.The repeter should not be fed with voltages higher than 5.5V.At least 2.3V is required to start it up.The temperature must be higher than -40°C for it to function properly.A temperature higher than 85°C should not be used.
ISL33003IRTZ-T Features

ISL33003IRTZ-T Applications
There are a lot of Intersil (Renesas Electronics America)
ISL33003IRTZ-T Signal Buffers, Repeaters, Splitters applications.

Add/Drop Muxes
Digital Crossconnects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Industrial PCs

Factory Lead Time	6 Weeks
Mount	Surface Mount
Number of Pins	8
Published	2006
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Supply Voltage-Max (Vsup)	5.5V
Temperature Grade	INDUSTRIAL
Supply Voltage-Min (Vsup)	2.3V
Analog IC - Other Type	ANALOG CIRCUIT
Operating Supply Current	4mA
Length	3mm
Width	3mm
RoHS Status	RoHS Compliant