ISPLSI 1016E-80LTN44 Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the 44-TQFP package, you will find it.In this case, there are 32 I/Os programmed.44 terminations are programmed into the device.This electrical component has a terminal position of QUAD.An electrical supply voltage of 5V is used to power it.Tray should be used to package the chip.Due to its reliability, it is operated at a temperature of 0°C~70°C TA.There should be a Surface Mount on the chip.The FPGA belongs to the ispLSI® 1000E series.A chip with 44 pins is programmed.The ISPLSI 1016 shows its related parts.A digital circuit can be constructed using 2000 gates.16logic blocks/elements are present.This device runs on 5V volts of electricity.There is a maximum supply voltage (Vsup) of 5.5V.If the supply voltage (Vsup) is greater than 4.5V, then the device will work properly.It is recommended that the clock frequency not exceed 57MHz.
ISPLSI 1016E-80LTN44 Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
5V power supplies

ISPLSI 1016E-80LTN44 Applications
There are a lot of Lattice Semiconductor Corporation
ISPLSI 1016E-80LTN44 CPLDs applications.

I/O expansion
Discrete logic functions
Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices

Mounting Type	Surface Mount
Package / Case	44-TQFP
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tray
Series	ispLSI® 1000E
Published	2002
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	44
ECCN Code	EAR99
HTS Code	8542.39.00.01
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Supply Voltage	5V
Terminal Pitch	0.8mm
Reach Compliance Code	compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ISPLSI 1016
Pin Count	44
JESD-30 Code	S-PQFP-G44
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	5V
Supply Voltage-Min (Vsup)	4.5V
Programmable Type	In System Programmable
Number of I/O	32
Clock Frequency	57MHz
Propagation Delay	18.5 ns
Number of Gates	2000
Output Function	MACROCELL
Number of Macro Cells	64
JTAG BST	NO
Voltage Supply - Internal	4.75V~5.25V
Delay Time tpd(1) Max	15ns
Number of Logic Elements/Blocks	16
Length	10mm
Width	10mm
RoHS Status	RoHS Compliant