ISPLSI 2096A-125LT128 OverviewCurrently, there are 96 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 128-LQFP package containing it.There are 96 I/Os on the board.Terminations of devices are set to 128.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TA in order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The ispLSI® 2000A series FPGA is one of these types.In this chip, the 128 pins are programmed.If you use this device, you will also find YES.The ISPLSI 2096 can be used to identify its related parts.For digital circuits, there are 4000 gates. These devices serve as building blocks.In total, there are 24 logic elements/blocks.A power supply of 5V is required to operate it.In this case, the maximum supply voltage (Vsup) is 5.25V.The input signals are detected by 3 dedicated inputs.Vsup (supply voltage) must be greater than 4.75V.Ideally, its clock frequency should not exceed 100MHz.
ISPLSI 2096A-125LT128 Features128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 2096A-125LT128 ApplicationsThere are a lot of Lattice Semiconductor Corporation
ISPLSI 2096A-125LT128 CPLDs applications.
Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | ispLSI® 2000A |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2096 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 3 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Length | 14mm |
| Height Seated (Max) | 1.6mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2096A-125LT128 Datasheet
+8613715157867