ISPPAC-CLK5520V-01T100I OverviewTray-method packaging is used for clock ICs. The 100-LQFP package contains this clock generator. This clock generator ic can sustain a maximum temperature of 240 during reflowing. It contains 100 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 320MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic levels. The clock-generating IC is a 100-bit device designed specifically for microprocessors. You can find related electrical components to the base part number ISPPAC-CLK5520. It is possible to connect to the frequency generators via 100 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. The ispClock™ series includes this electronic part. 20 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.05 ns Max, this clock generator offers low timing skew. When searching for parts of the 5500 family, similar frequency generators will be found. Logic circuits based on PLL BASED CLOCK DRIVER logic use this electronic frequency generator.
ISPPAC-CLK5520V-01T100I FeaturesAvailable in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5520V-01T100I ApplicationsThere are a lot of Lattice Semiconductor Corporation
ISPPAC-CLK5520V-01T100I Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | ispClock™ |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPPAC-CLK5520 |
| Output | HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Pin Count | 100 |
| Number of Outputs | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 150mA |
| Frequency (Max) | 320MHz |
| Family | 5500 |
| Input | HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Ratio - Input:Output | 2:20 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
ISPPAC-CLK5520V-01T100I Datasheet
+8613715157867