ISPPAC-CLK5620AV-01TN100I OverviewAs a clock IC, it uses the Tray package. 100-LQFP contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 100 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 400MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic levels. In particular, this clock PLL is designed to be used with microprocessors. ISPPAC-CLK5620A is the base part number for finding related electronic parts. There is a 100 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. A member of the ispClock™ series, this electronic component is made of plastic. 20 signal outputs allow for maximi20ation of output frequency. At 0.05 ns Max, this analog clock generator exhibits low timing skew. The 5600 family of parts can be used to find electric parts that are similar to each other. PLL BASED CLOCK DRIVER logic circuits mainly utiliPLL BASED CLOCK DRIVERe this time clock generator. At a frequency of 20MHz, the system can achieve high efficiency.
ISPPAC-CLK5620AV-01TN100I FeaturesAvailable in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5620AV-01TN100I ApplicationsThere are a lot of Lattice Semiconductor Corporation
ISPPAC-CLK5620AV-01TN100I Clock Generators applications.
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | ispClock™ |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPPAC-CLK5620A |
| Output | EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Pin Count | 100 |
| Number of Outputs | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 7mA |
| Frequency (Max) | 400MHz |
| Family | 5600 |
| Input | HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Ratio - Input:Output | 2:20 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 8.8 ns |
| Divider/Multiplier | Yes/No |
| fmax-Min | 400 MHz |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ISPPAC-CLK5620AV-01TN100I Datasheet
+8613715157867