LAMXO2280E-3FTN256E Overview 1140 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 256-LBGA package.The device is programmed with 211 I/O ports.It is programmed to terminate devices at 256.There is a BOTTOM terminal position on the electrical part in question.The device is powered by a voltage of 1.2V volts.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at -40°C~125°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the LA-MachXO series contain this type of chip.With 256 pins programmed, the chip is ready to use.You can find its related parts in the LAMXO2280.If high efficiency is desired, the supply voltage should be kept at 1.2V.It is recommended that data be stored in SRAM.In this case, it is mounted by Surface Mount.The pins are 256.This device operates at a voltage of 1.26V when the maximum supply voltage is applied.With a minimal supply voltage of 1.14V, it operates.285 logic blocks (LABs) make up this circuit.An elementary building block consists of 2280logic elements/cells.The clock frequency of this device should not exceed 25MHz.It is configured with an output of 211.
LAMXO2280E-3FTN256E Features256-LBGA package
211 I/Os
The operating temperature of -40°C~125°C TA
256 pin count
256 pins
285 logic blocks (LABs)
211 outputs
LAMXO2280E-3FTN256E ApplicationsThere are a lot of Lattice Semiconductor Corporation
LAMXO2280E-3FTN256E CPLDs applications.
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
D/T registers and latches
Synchronous or asynchronous mode
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | 256-LBGA |
| Mounting Type | Surface Mount |
| Number of Pins | 256 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Series | LA-MachXO |
| Published | 2009 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LAMXO2280 |
| Pin Count | 256 |
| Number of Outputs | 211 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Number of I/O | 211 |
| Nominal Supply Current | 20mA |
| Memory Type | SRAM |
| Clock Frequency | 25MHz |
| Propagation Delay | 5.1 ns |
| Number of Logic Elements/Cells | 2280 |
| Screening Level | AEC-Q100 |
| Number of Logic Blocks (LABs) | 285 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1140 |
| Voltage Supply - Internal | 1.14V~1.26V |
| Length | 17mm |
| Height Seated (Max) | 1.55mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LAMXO2280E-3FTN256E Datasheet
+8613715157867