LC4256C-75T176I OverviewCurrently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 176-LQFP package containing it.There are 128 I/Os on the board.Terminations of devices are set to 176.QUAD is the terminal position of this electrical part.A voltage of 1.8Vprovides power to the device.It is recommended that the chip be packaged by Tray.The device operates at a temperature of -40°C~105°C TJ in order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The ispMACH® 4000C series FPGA is one of these types.In this chip, the 176 pins are programmed.If you use this device, you will also find YES.The LC4256 can be used to identify its related parts.Optimal efficiency requires a supply voltage of 1.8V.For data storage, EEPROM is adopted.A Surface Mount is mounted on this electronic component.There are 176 pins on it.There is a maximum supply voltage of 1.95V when the device is operating.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.In total, there are 16 logic elements/blocks.There are a total of 96 Programmable I/Os.322MHz is the maximum frequency.The input signals are detected by 4 dedicated inputs.
LC4256C-75T176I Features176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4256C-75T176I ApplicationsThere are a lot of Lattice Semiconductor Corporation
LC4256C-75T176I CPLDs applications.
Bootloaders for FPGAs
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | ispMACH® 4000C |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 96 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Length | 24mm |
| Height Seated (Max) | 1.6mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-75T176I Datasheet
+8613715157867