LC4384B-75T176I Overview384 macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 176-LQFP package contains the item.This device has 128 I/O ports programmed into it.It is programmed that device terminations will be 176 .The terminal position of this electrical component is QUAD.A voltage of 2.5V is used as the power supply for this device.It is recommended to package the chip by Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.Mount the chip by Surface Mount.This type of FPGA is a part of the ispMACH® 4000B series.Chips are programmed with 176 pins.If this device is used, you will also be able to find YES.There are related parts in LC4384.If high efficiency is to be achieved, the supply voltage should be maintained at 2.5V.Data storage is performed using EEPROM.In this case, Surface Mount is used to mount the electronic component.The 176 pins are designed into the board.A voltage of 2.7V is the maximum supply voltage for this device.A minimum supply voltage of 2.3V is required for this device to operate.A total of 44programmable I/Os are available.Ideally, the maximal frequency should be lower than 322MHz Hz.To detect input signals, there are 4 dedicated inputs.The fundamental building block consists of 24 logic elements/cells.
LC4384B-75T176I Features176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4384B-75T176I ApplicationsThere are a lot of Lattice Semiconductor Corporation
LC4384B-75T176I CPLDs applications.
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | ispMACH® 4000B |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384B-75T176I Datasheet
+8613715157867