LC5256MB-5F256C Overview
256 macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 256-BGA package contains the item.This device has 141 I/O ports programmed into it.It is programmed that device terminations will be 256 .The terminal position of this electrical component is BOTTOM.A voltage of 2.5V is used as the power supply for this device.It is recommended to package the chip by Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.Mount the chip by Surface Mount.This type of FPGA is a part of the ispXPLD® 5000MB series.Chips are programmed with 256 pins.If this device is used, you will also be able to find YES.There are related parts in LC5256.In digital circuits, there are 75000 gates, which act as a basic building block.If high efficiency is to be achieved, the supply voltage should be maintained at 2.5V.Data storage is performed using EEPROM, SRAM.In this case, Surface Mount is used to mount the electronic component.A voltage of 2.7V is the maximum supply voltage for this device.A minimum supply voltage of 2.3V is required for this device to operate.A total of 100programmable I/Os are available.Ideally, the maximal frequency should be lower than 300MHz Hz.The fundamental building block consists of 8 logic elements/cells.
LC5256MB-5F256C Features
256-BGA package
141 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count

LC5256MB-5F256C Applications
There are a lot of Lattice Semiconductor Corporation
LC5256MB-5F256C CPLDs applications.

Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	256-BGA
Operating Temperature	0°C~90°C TJ
Packaging	Tray
Series	ispXPLD® 5000MB
Published	2000
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	256
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn63Pb37)
Additional Feature	YES
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	225
Supply Voltage	2.5V
Terminal Pitch	1mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	LC5256
Pin Count	256
Qualification Status	Not Qualified
Operating Supply Voltage	2.5V
Programmable Type	In System Programmable
Max Supply Voltage	2.7V
Min Supply Voltage	2.3V
Operating Supply Current	26mA
Number of I/O	141
Nominal Supply Current	26mA
Memory Type	EEPROM, SRAM
Propagation Delay	6 ns
Number of Logic Elements/Cells	8
Number of Gates	75000
Max Frequency	300MHz
Number of Programmable I/O	100
Output Function	MACROCELL
Number of Macro Cells	256
JTAG BST	YES
Voltage Supply - Internal	2.3V~2.7V
Delay Time tpd(1) Max	5ns
Length	17mm
Height Seated (Max)	2.1mm
Width	17mm
RoHS Status	Non-RoHS Compliant
Lead Free	Lead Free