LF356MX Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. J-FET-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 18V. The instrumentation amplifier is packed in the form of TAPE AND REEL. The BI-FET™ indicates the series number of the op amp.
LF356MX Features
8 Pins
supply voltage of 15V
106.02dB voltage gain

LF356MX Applications
There are a lot of Texas Instruments
LF356MX Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Series	BI-FET™
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Packing Method	TAPE AND REEL
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	1
Supply Voltage	15V
Base Part Number	LF356
Pin Count	8
Operating Supply Voltage	18V
Number of Elements	1
Operating Supply Current	5mA
Nominal Supply Current	5mA
Power Dissipation	380mW
Output Current	25mA
Slew Rate	12V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	80 dB
Current - Input Bias	30pA
Voltage - Supply, Single/Dual (±)	±15V
Input Offset Voltage (Vos)	10mV
Gain Bandwidth Product	5MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	5000 kHz
Voltage Gain	106.02dB
Average Bias Current-Max (IIB)	0.0002μA
Power Supply Rejection Ratio (PSRR)	80dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	3mV
Low-Bias	YES
Bias Current-Max (IIB) @25C	0.0002μA
Input Offset Current-Max (IIO)	0.002μA
Length	4.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead