LM358ADGKR amplifiers have a single supply. LM358ADGKR amp are low-power CMOS operational amplifiers. The low current of the supply, as well as the input current bias, is a perfect fit for low-power devices such as smoke detectors as well as other sensors with high impedance. LM358ADGKR IC is ideal for applications that require low power on a single supply.

In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1mA . There should be no change in the voltage gain at 100dB.  Op amp ic has 2 channels. The operating supply voltage of the buffer op amp is rated at 16V. For the packing of the instrumentation amplifier, TR is adopted.

8 Pins
supply voltage of 5V
100dB voltage gain

There are a lot of Texas Instruments LM358ADGKR Instrumentational OP Amps applications.

• Radiation thermometry transducers

  
  

• Signal filtering

  
  

• Power control

  
  

• Strain gauges

  
  

• Polarized electrodes

  
  

• Multimedia playback equipment

  
  

• MP3

  
  

• Test and measurement instruments

  
  

• Inverse/same-phase proportional circuit

  
  

• Displayers for aircraft and air transportation control systems

  
  

  Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
  Factory Lead Time	8 Weeks
  Mount	Surface Mount
  Mounting Type	Surface Mount
  Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  Number of Pins	8
  Operating Temperature	0°C~70°C
  Packaging	Tape & Reel (TR)
  JESD-609 Code	e4
  Pbfree Code	yes
  Part Status	Active
  Moisture Sensitivity Level (MSL)	1 (Unlimited)
  Number of Terminations	8
  ECCN Code	EAR99
  Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
  Packing Method	TR
  Terminal Position	DUAL
  Terminal Form	GULL WING
  Peak Reflow Temperature (Cel)	260
  Number of Functions	2
  Supply Voltage	5V
  Terminal Pitch	0.65mm
  Base Part Number	LM358
  Pin Count	8
  Operating Supply Voltage	16V
  Power Supplies	+-1.5/+-15/3/30V
  Number of Channels	2
  Operating Supply Current	1mA
  Nominal Supply Current	1.2mA
  Output Current	30mA
  Slew Rate	0.3V/μs
  Architecture	VOLTAGE-FEEDBACK
  Amplifier Type	General Purpose
  Common Mode Rejection Ratio	65 dB
  Current - Input Bias	20nA
  Voltage - Supply, Single/Dual (±)	3V~32V ±1.5V~16V
  Output Current per Channel	30mA
  Input Offset Voltage (Vos)	3mV
  Bandwidth	700 kHz
  Unity Gain BW-Nom	700 kHz
  Voltage Gain	100dB
  Low-Offset	NO
  Frequency Compensation	YES
  Voltage - Input Offset	2mV
  Low-Bias	NO
  Micropower	NO
  Bias Current-Max (IIB) @25C	0.1μA
  Programmable Power	NO
  Dual Supply Voltage	9V
  Power	NO
  Input Offset Current-Max (IIO)	0.03μA
  Height	1.07mm
  Length	3mm
  Width	3mm
  Thickness	970μm
  REACH SVHC	No SVHC
  Radiation Hardening	No
  RoHS Status	ROHS3 Compliant
  Lead Free	Lead Free