LM4550BVH/NOPB OverviewDue to space constraints, it is supplied in the 2-SMD, No Lead package. This package uses the Tray packaging method. This electronic part is categorized as a type of MHz Crystal, making it capable of providing high-efficiency performance in a variety of applications. Surface Mount is the mounting type employed by this device. Operating performance -40°C ~ 85°C permits it to function normally. There are 48 pins on this board. A wide range of applications can be met by this electronic component belonging to the 435 series. It is not recommended to exceed 85C for maximum operating temperature. Minimum operating temperature should be higher than -40C.
LM4550BVH/NOPB FeaturesEmbedded in the 2-SMD, No Lead package
Operating temperature of -40°C ~ 85°C
LM4550BVH/NOPB ApplicationsThere are a lot of National Semiconductor
LM4550BVH/NOPB CODECs Interface ICs applications.
Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
Motor feedback
Packaging
Printing
Registration mark timing
| Mounting Type | Surface Mount |
| Package / Case | 2-SMD, No Lead |
| Package | Tape & Reel (TR) |
| Mfr | CTS-Frequency Controls |
| Product Status | Active |
| Height - Seated (Max) | 0.197 L x 0.126 W (5.00mm x 3.20mm) |
| Package Type | LQFP |
| Single Supply Voltage (Min) | 3/4.2 V |
| Interface Type | AC97 |
| Number of ADCs | 2 |
| Single Supply Voltage (Typ) | 3.3/5 V |
| Operating Supply Voltage (Max) | 5.5(V) |
| Operating Supply Voltage (Typ) | 3.3/5(V) |
| Rad Hardened | No |
| Operating Supply Voltage (Min) | 3/4.2(V) |
| Single Supply Voltage (Max) | 5.5 V |
| Number of DACs | 2 |
| Mounting | Surface Mount |
| Operating Temperature | -40°C ~ 85°C |
| Series | 435 |
| Packaging | Tray |
| Size / Dimension | 0.197 L x 0.126 W (5.00mm x 3.20mm) |
| Type | MHz Crystal |
| Frequency | 24.576 MHz |
| Frequency Stability | ±30ppm |
| Pin Count | 48 |
| Operating Temperature (Max) | 85C |
| Operating Temperature (Min) | -40C |
| ESR (Equivalent Series Resistance) | 40 Ohms |
| Load Capacitance | 10pF |
| Operating Mode | Fundamental |
| Frequency Tolerance | ±30ppm |
| Screening Level | Industrial |
| Power Supply Type | Analog/Digital |
| Ratings | - |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Operating Temperature | -40°C~85°C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Audio, AC '97 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM4550 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | I2C, I2S, SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Data Interface | Serial |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.2V~5.5V |
| Voltage - Supply, Digital | 3V~5.5V |
| Gain | 60 dB |
| Power Consumption | 280mW |
| Signal to Noise Ratio (SNR) | 90 dB |
| Resolution (Bits) | 18 b |
| Number of DAC Channels | 2 |
| Number of Analog Inputs | 7 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 89 |
| Number of Analog Outputs | 4 |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |