LM8262MM OverviewThere is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 11V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 7mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 2.5mA . It is recommended to keep the voltage gain at 84dB at all times. On the buffer amps, there are 2 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 11V. This linear amplifier pack is based on the TR axis.
LM8262MM Features8 Pins
supply voltage of 11V
84dB voltage gain
Output Type: Rail-to-Rail
LM8262MM ApplicationsThere are a lot of Texas Instruments
LM8262MM Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 11V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM8262 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 11V |
| Number of Channels | 2 |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 53mA |
| Slew Rate | 15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 1.05μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~22V ±1.25V~11V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 21MHz |
| Gain Bandwidth Product | 24MHz |
| Neg Supply Voltage-Nom (Vsup) | -11V |
| Unity Gain BW-Nom | 21000 kHz |
| Voltage Gain | 84dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
+8613715157867