LM833M/NOPB OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Audio-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 18V.
LM833M/NOPB Features8 Pins
supply voltage of 15V
110dB voltage gain
LM833M/NOPB ApplicationsThere are a lot of Texas Instruments
LM833M/NOPB Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Factory Lead Time | 6 Weeks |
Contact Plating | Tin |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Number of Pins | 8 |
Operating Temperature | -40°C~85°C |
Packaging | Tube |
JESD-609 Code | e3 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
Termination | SMD/SMT |
ECCN Code | EAR99 |
Max Power Dissipation | 500mW |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 2 |
Supply Voltage | 15V |
Base Part Number | LM833 |
Pin Count | 8 |
Operating Supply Voltage | 18V |
Number of Channels | 2 |
Operating Supply Current | 5mA |
Nominal Supply Current | 5mA |
Power Dissipation | 500mW |
Output Current | 40mA |
Max Supply Current | 8mA |
Slew Rate | 7V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | Audio |
Common Mode Rejection Ratio | 80 dB |
Current - Input Bias | 500nA |
Voltage - Supply, Single/Dual (±) | ±5V~15V |
Input Offset Voltage (Vos) | 5mV |
Gain Bandwidth Product | 15MHz |
Neg Supply Voltage-Nom (Vsup) | -15V |
Unity Gain BW-Nom | 15000 kHz |
Voltage Gain | 110dB |
Average Bias Current-Max (IIB) | 1μA |
Power Supply Rejection Ratio (PSRR) | 80dB |
Low-Offset | NO |
Frequency Compensation | YES |
Voltage - Input Offset | 300μV |
Low-Bias | NO |
Micropower | NO |
Bias Current-Max (IIB) @25C | 1μA |
Programmable Power | NO |
Dual Supply Voltage | 9V |
Wideband | NO |
Load Impedance | 2kOhm |
Height | 1.75mm |
Length | 4.9mm |
Width | 3.91mm |
Thickness | 1.58mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |