Add to cart |
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a Audio-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. There is an input offset voltage of 100μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 10mA. Op amp is a member of the 140dB's 140dB family. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 17V. A TR-shaped amplifier is used to pack the buffer amps.
8 Pins
supply voltage of 5V
140dB voltage gain
There are a lot of Texas Instruments LME49720MAX/NOPB Instrumentational OP Amps applications.
High/low-pass filter circuit
RF cable systems
Portable electronic products powered by batteries
Test equipment
Signal filtering
Medical imaging
Power control
Computer workstations
Semiconductor detectors
Weak signal detection
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LME49720 |
| Pin Count | 8 |
| Operating Supply Voltage | 17V |
| Number of Elements | 2 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Output Current | 26mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~17V |
| Output Current per Channel | 26mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 55000 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.000065μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LME49720MAX/NOPB Datasheet
+8613715157867