LMH6639MFX/NOPB OverviewThe linear amplifier is packaged in a SOT-23-6 case. This is a Voltage Feedback type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 6. Buffer amplifier has a total of 6 pins. Please take in mind that this instrumentation amplifier should be run at 5V. The buffer op amp includes 6 pins. Regarding input offset voltage, op amp rates 5mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 4.18mA. It is a member of the 100dB's 100dB family. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This linear amplifier has a total of 1 elements. TR is adopted to pack the instrumentation amplifier. VIP10™ corresponds to the op amp's series.
LMH6639MFX/NOPB Features6 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMH6639MFX/NOPB ApplicationsThere are a lot of Texas Instruments
LMH6639MFX/NOPB Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMH6639 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 4.18mA |
| Nominal Supply Current | 3.6mA |
| Output Current | 110mA |
| Slew Rate | 200V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 112mA |
| Input Offset Voltage (Vos) | 5mV |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 86000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 3.25μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.3mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 228MHz |
| Programmable Power | NO |
| Wideband | YES |
| Input Offset Current-Max (IIO) | 0.8μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867