LMK04906BISQE/NOPB OverviewThe Cut Tape (CT) method is used for packaging clock ICs. As part of the 64-WFQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 64 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVCMOS, LVDS, LVPECL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 2.6GHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 3.15V~3.45V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of LVCMOS, LVDS, LVPECL logic. It is a 64-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number LMK04906. There are 64 pins on the frequency generators that are available for use. PLLatinum™ series electronic parts are used in this part. 6 signal outputs are provided for enhancing output frequency as much as possible. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator. Using a frequency of 500MHz allows frequency synthesizer to achieve high efficiencies. In other words, PLL is capable of delivering a load capacitance of 5pF. This clock generator ic is ideal for the TR package that comes with it. With this time clock generator, you get 3 inputs.
LMK04906BISQE/NOPB FeaturesAvailable in the 64-WFQFN Exposed Pad
Supply voltage of 3.3V
Load capacitance of 5pF
LMK04906BISQE/NOPB ApplicationsThere are a lot of Texas Instruments
LMK04906BISQE/NOPB Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-WFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | PLLatinum™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Max Power Dissipation | 100μW |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 500MHz |
| Base Part Number | LMK04906 |
| Output | LVCMOS, LVDS, LVPECL |
| Pin Count | 64 |
| Number of Outputs | 6 |
| Number of Circuits | 1 |
| Load Capacitance | 5pF |
| Nominal Supply Current | 410mA |
| Frequency (Max) | 2.6GHz |
| Number of Inputs | 3 |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 3:6 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| Max I(ol) | 0.0005 A |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Height | 800μm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 0m |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMK04906BISQE/NOPB Datasheet
+8613715157867