LMK61I2-100M00SIAR Overview
There is a 6-SMD Module enclosure with the programmable timer. It is used to pack in Tape & Reel (TR) case. It is recommended to mount in type Surface Mount.The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes HCSL. It is based on LMK61. The timer clock contains 6 pins. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT. On operating frequency, it's available in the range of 100MHz. The number of the chip's terminations sums up to 6.
LMK61I2-100M00SIAR Features
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Max Operating temperature at -40°C
Additional Feature: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT

LMK61I2-100M00SIAR Applications
There are a lot of Texas Instruments
LMK61I2-100M00SIAR Programmable Timers & Oscillators applications.

Intruder Detection
Tamper Detection
Home Automation Sensors
Thermostats
Consumer Electronics
Remote Sensors
White Goods
Electric Vehicles
Always On Systems
Clutch Actuator circuit

Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	6-SMD Module
Surface Mount	YES
Number of Pins	6
Packaging	Tape & Reel (TR)
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	6
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT
Supply Voltage	3.3V
Frequency Stability	50%
Base Part Number	LMK61
Physical Dimension	7.1mm x 5.1mm x 1.15mm
Operating Frequency	100MHz
Symmetry-Max	55/45%
Supply Voltage-Min (Vsup)	3.135V
Oscillator Type	HCSL
Output Load	50 OHM
Frequency Adjustment-Mechanical	NO
Height	1.15mm
Length	7mm
Width	5mm
Thickness	800μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free