LMV932DMR2G Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 95μA and 10 . Maintain 90dB as the voltage gain. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
LMV932DMR2G Features
8 Pins
supply voltage of 2.7V
90dB voltage gain
Output Type: Rail-to-Rail

LMV932DMR2G Applications
There are a lot of ON Semiconductor
LMV932DMR2G Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Factory Lead Time	4 Weeks
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Packing Method	TAPE AND REEL
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	LMV932
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	95μA
Nominal Supply Current	190μA
Slew Rate	0.48V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	1nA
Max Input Voltage	5V
Voltage - Supply, Single/Dual (±)	1.8V~5V
Halogen Free	Halogen Free
Output Current per Channel	80mA
Input Offset Voltage (Vos)	1mV
Bandwidth	1.5MHz
Unity Gain BW-Nom	1400 kHz
Voltage Gain	90dB
Power Supply Rejection Ratio (PSRR)	50dB
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Length	3mm
Height Seated (Max)	1.1mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free