LMX1600TM/NOPB OverviewThe Tube method is used for packaging clock ICs. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 3V voltage should be applied. In this clock generator, CMOS, TTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 2GHz 500MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 2.7V~3.6V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of CMOS logic. It has been classified as a PLL Frequency Synthesizer, Delta Sigma electronic part, which means that it is a semiconductor. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number LMX1600. There are 16 pins on the frequency generator that are available for use. Supply voltage 3V is what time clock generator can handle. PLLatinum™ series electronic parts are used in this part. 3 signal outputs are provided for enhancing output frequency as much as possible. The clock PLL here has 2 elements and has a very low jitter performance.
LMX1600TM/NOPB FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
LMX1600TM/NOPB ApplicationsThere are a lot of Texas Instruments
LMX1600TM/NOPB Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | PLLatinum™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | PLL Frequency Synthesizer, Delta Sigma |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LMX1600 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 2GHz 500MHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 3:1 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LMX1600TM/NOPB Datasheet
+8613715157867