LT1214CS#PBF OverviewIn the package, you will find a 16-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 16 pins on it. Op amp rates 100μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 3.4mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 118.59dB for the time being. A instrumentation amplifier like this has 4 circuits. On the buffer amps, there are 4 channels that can be used. The operating supply voltage of the buffer op amp is rated at 3V.
LT1214CS#PBF Features16 Pins
supply voltage of 15V
118.59dB voltage gain
LT1214CS#PBF ApplicationsThere are a lot of Linear Technology/Analog Devices
LT1214CS#PBF Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1214 |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Operating Supply Current | 3.4mA |
| Max Supply Current | 15.2mA |
| Slew Rate | 12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 90nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~36V ±1.25V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 26MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 28000 kHz |
| Voltage Gain | 118.59dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 150μV |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 28MHz |
| Height | 1.5mm |
| Length | 10.01mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1214CS#PBF Datasheet
+8613715157867