LTC2418IGN#PBF OverviewThe analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 28-SSOP (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 16 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 7.5 Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to LTC2418 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Single number.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.8, 16 inputs are employed.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 2.75V.The ADC converter operates from 3/5V power supplies.The minimal analog input voltage of this electrical AD converter is -2.75V.The ADC converter consists of 1 elements.It is a type of FPGA belonging to the microPOWER™ series.
LTC2418IGN#PBF Features1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements
microPOWER™ series
LTC2418IGN#PBF ApplicationsThere are a lot of Linear Technology/Analog Devices
LTC2418IGN#PBF ADC applications.
CMOS Image sensors for mobile applications
Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | microPOWER™ |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2418 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Power Supplies | 3/5V |
| Configuration | MUX-ADC |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 200μA |
| Number of Bits | 24 |
| Input Type | Differential, Single Ended |
| Architecture | Sigma-Delta |
| Number of Inputs | 8, 16 |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 3 B |
| Sampling Rate | 7.5 sps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 16 |
| Sampling Rate (Per Second) | 7.5 |
| Output Bit Code | BINARY |
| Analog Input Voltage-Max | 2.75V |
| Analog Input Voltage-Min | -2.75V |
| Length | 9.893mm |
| Width | 3.899mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2418IGN#PBF Datasheet
+8613715157867